Products
1+10Gb Ethernet & All-inOne Tester > BL6000A
HOME > Product > 1+10Gb Ethernet & All-inOne Tester > BL6000A
6000a
  • Request Information
  • How To Buy
  • manual
  • brochure
  • application note

Key Features and Benefits

  • Anytime, anywhere Ethernet/SONET/SDH/OTN/Fiber Channel testing
  • Compact, ultra lightweight form factor
  • Intuitive Graphical User Interface (GUI)
    -Reduces training time
  • Eliminates the need for multiple test instruments
    -Reduces cost of ownership
  • Open architecture H/W and S/W platforms
    -Capabilities to Support the Expansion of Your T&M Needs on a Higher Scale
  • SONET/SDH
    -Tx Overhead Byte Sequence Generation

    Up to 256 bytes

    -Rx Overhead Byte Capture

    Up to 256 events

    K1/K2 bytes are captured together

    -Multi-Channel Monitoring

    Concurrent real time monitoring function up to 48 x AU3 and 28 x TU11/12

  • 1G/10G Ethernet
    -32 Multi-stream Traffic Generation & Analysis

    Layer 1/2/3/4 packets & fully customized packets

    -Powerful built-in Packet Capture/Decode

    Dual ports or Single port

    -Packet Jitter Test in RFC2544
    -Real Time Traffic Monitoring
    -Packet Flooding
    -Wireless LAN (WiFi)
    -VoIP / IPTV
    -100FX optical

General Specifications

  • Hybrid user interface (UI) with graphical color touch-screen and also keypad at the same time, user-friendly
  • Supports multi-physical ports such as 1 10GbE (XFP), fiber 1000 BASE-SX/LX/ZX, 100FX, and copper 10/100/1000 BASE-T on one platform
  • Be able to upgrade a new software version via USB or FTP.
  • File Manager: Be able to copy testing results, log files, screen capture and packet capture files to USB memory card
  • Simplifies the troubleshooting of VoIP and IPTV services at the residential gateway
  • Optical power measurement
  • Customizable test profiles for quick and efficient test set configuration

10/100/1000MB & 10 Gigabit Ethernet Basic Features

  • Throughput testing, generate multi-stream traffic up to 10Gbit/s on XFP, 1Gbit/s line rate on copper and optical multi-ports, Ethernet frames, layer 1/2/3/4 with multiple modes such as continuous, ramping, burst and random length mode.
  • Multiple streams : Generate and measure up to 32 independent streams
  • IP application test such as Ping, ARP, Trace Route, DNS, and DHCP
  • In-depth powerful built-in CAPTURE and analysis functions regarding all packets, filtered or event triggered option.
  • Cable diagnostics (TDR) such as cable fault, irregular impedance, cable length
  • Configurable QoS such as CoS, TOS, and DSCP
  • Supports filtered measurement such as Round Trip Delay (RTD), Packet Arrival Interval (PAI), Checksum error, Duplication error
  • Fully automated RFC2544 testing and reporting: throughput, latency, frame loss, and back-to-back frames without loss, all varying frame sizes defined in RFC 2544 standard on optical 10G XFP, 1G/100FX and copper 10/100/1000 BASE-T.
    - Packet jitter test is added to RFC2544 test mode
  • Local and Remote loopback testing at layer 2 (MAC) , layer 3 (IP) and layer 4 (TCP/UDP)
    - Auto loopback feature

Additional Ethernet Features

  • Cable BERT on copper port, BERT in Unframed mode on fiber optical port
  • Supports statistics measurements, such as utilization, VLAN, flow control frame and packets, uni/multi/broadcasts, under 64 Byte frame, Jumbo frame and etc.
  • VLAN scan on ports, VLAN id and Q-in-Q stacking up to 3 VLANs
  • MPLS testing stacking up to 3 MPLS
  • Packet statistics measurement such as utilization, VLAN, flow control frame and packets, uni/multi/broadcasts, fewer than 64 byte (runt) frame, jumbo frame with global and filtered
  • Packet flooding : Flood any field in the packet (e.g., ip address, vlan, port, user defined)
  • Supports cable diagnostics. It utilizes TDR to detect and identify cable faults, perform estimation cable length, identify irregular impedance on metallic paired cable, twisted pair.
  • Powerful Ethernet network troubleshooting tool kit and performance measurement tool kit.

OTN Features

  • OTN Testing : OTU1 (2.7 Gbit/s) and OTU2 (10.7 Gbit/s) bit rates
  • Over-clocked OTU2 rates: OTU1e (11.0491 Gbit/s) and OTU2e (11.0957 Gbit/s)- Optional : G.709 FEC is used(Not include Super FEC)
  • Asynchronous/Synchronous mapping/de-mapping of SONET/SDH signals within OTU1/OTU2
  • Forward error correction (FEC) testing
  • OTU, ODU, OPU overhead manipulation and monitoring
  • OTU, ODU (including ODU TCM), OPU layer alarms/errors generation and analysis
  • OTU, ODU (including ODU TCM) trace messages
  • Mux/demux of ODU1/ODU2 testing
  • ODU multiplexing alarm-generation and analysis
  • Programmable error/alarm injection

SDH/SONET Basic Features

  • Reference clock out
    - SDH: 622M (STM-64) or 155M (STM-16 and below)
    - OTN: 669M (OTU-2) or 167M (OTU-1)
  • Frequency analysis and power measurement
  • Frequency offset generation
  • Round-trip delay measurements
  • Through mode analysis
  • Intrusive Through mode
  • Unframed mode at all of protocol rates
  • BITS Clock for Tx reference clock source:
    - T1/E1/2.048Mhz

SDH/SONET Test Features

  • Terminated/Line thru/Intrusive thru mode
  • SDH(SONET) testing :
    155Mb/s, 622Mb/s, 2.5Gb/s and 9.6Gb/s
    = STM1/4/16/64 = STS-3/12/48/192
  • High-order mapping include ACAT
    STS-1/3c/6c/9c/12c/24c/48c/192c and AU-3/AU-4/AU-4-2c/3c/4c/8c/16c/64c
  • Low-order mappings:
    STS1-VT2-VT2SPE/STS1-VT2-VT1.5SPE/STS1-VT1.5-VT1.5SPE and AU4-TU3-VC3/AU4-TU12-VC12/AU4-TU12-VC11/AU4-TU11-VC-11/AU3-TU12-VC12/AU3-TU12-VC11/AU3-TU11-VC-11
  • Section/RS, Line/MS, high-order (HO) and low-order (LO) path overhead manipulation and monitoring
  • Section/RS, Line/MS, high-order (HO) and low-order (LO) path alarm/error generation and monitoring
  • High-order (HO) and low-order (LO) pointer generation and monitoring/capturing(up to 512 actions)
  • Tandem connection monitoring
  • Performance monitoring: G.821, G.826, G.828, G.829, M.2100, M.2101
  • Automatic protection switching and service disruption time measurements
  • Programmable error/alarm injection

Fiber-Channel Features

  • 1G/2G/4G Fiber Channel support for Storage Area Networks

Specifications

  • Ports:
    - 1 XFP : 9.6G - 11.1G
    - 1 SFP : 155M - 4.25G
    - 1 Bantam(Rx) : BITS Clock in
    - 1 SMA(Tx) : Tx reference Clock Out
    - RJ45 10/100M/1000Mbit/s Ethernet port.
    - USB (Universal Serial Bus).
    - Dual Bantam(T/Rx) : 1.5M - 2M
    - 2 BNC : 34M/45M/139M/51M/155M
  • Dimensions:
    - Size: 172.5 x 227 x 58.5 (mm)
    - Weight: 1.3(kg) with battery. Battery - 0.3 (kg)
  • Rugged Casing
  • User Interface:
    - Color TFT-LCD touch screen
    - Keypad
  • Permissible Ambient Temp.: 0c ~ 40c
  • Storage Temp.: -20c ~ +70c
  • Humidity: 10% ~ 90%
  • Power:
    - AC adaptor: 100V~240 V(50Hz/60Hz)
    - Removable/Rechargeable lithium ion batteries
    - Battery life: 3 hours typical, 8 hour in standby mode
    - Charging time: 1 ~ 2 hours
  • Memory:
    - 2GByte internal Flash memory included

Contact Information

US & Canada:

  • Tel: +1 408 435-3897
  • Fax: +1 408 435-2719
Copyright(c) Bluelight Technology Inc. All right reserved